Home>Knowledge
A restricted transmission oil cooler and slipping forward clutch caused thermal runaway and fluid degradation
Misaligned lift cylinder anchor pins and stretched anchor bolts caused the inner mast to twist, jamming the rollers
A blocked travel motor bypass valve and worn travel brake seals caused one track to move slower and overheat
A sheared priority valve pin and clogged suction strainer caused simultaneous steering failure and hydraulic lag
A bent lift cylinder rod and dry mast rails caused jerky vertical movement and chain binding
A stuck turbocharger wastegate actuator and clogged air filter caused over-fueling and poor combustion
A worn stator support and leaking forward clutch piston caused power loss and long shift times
Burnt friction discs in the transmission and a stuck shift solenoid caused loss of backward movement
A worn swing motor swash plate and faulty relief valve caused high backpressure and engine overload
A sheared priority valve locating pin and worn lift cylinder piston seal caused simultaneous hydraulic failures
